Air Cleaner - Honda 1986 GoldWing GL1200A Manual

Maintenance
Air Cleaner - - - - - - - - - - - - - - - - - - - - - - - -
Open the top compartment cover.
Pull the fuse/relay box up and to the rear.
Disconnect the couplers from the E.T.C.
Remove the wing nut.
Disconnect the three couplers to remove the fuse/relay
box and coupler holder.
Disconnect the T 1 sensor coupler and the breather hose
from the air cleaner cover
Remove the air cleaner cover.
TI SENSOR COUPLER
BREATHER HOSE
COUPLER HOLDER
Remove and discard the air cleaner element.
Install the new element with the breather hose grommet
facing the rear.
Install the air cleaner cover by inserting the T1 sensor In
the forward grommet on the element.
Tignten the cover with the wing nut and connect the
breather hose.
Install parts in the reverse order of removal.
NOTE: Be careful not to damage the coupler terminals
during installation.
3·4
AIR CLEANER COVER
~~~~~=;;...GROMMETS