Honda 1986 GoldWing GL1200A Manual page 121

System does not operate, with 'IEEE" displayed.
COUPLERS: Check solenoid valve, RHC
unit, and air pump relay coupler terminals
for poor contact
Normal
RELA Y: Replace air pump relay in fuse,'
Normal
relay box with a known good relay and
recheck operation.
Abnormal
WIRING: Disconnect suspension computer
Abnormal
20P coupler. Check resistance between
Lg/R and body ground. Ohmmeter should
Indicate about 100 Q
About
100Q
WIRING: Disconnect suspension computer
and solenoid valve 4P couplers. Check G.
Br'W Br/R and BrN wires for continuity
Abnormal
oetween RHC unit and solenoid valve
couplers of wire harness. Between same
COlor' Continuity Between different colors:
No continuity.
Normal
SOLENOID VALVE: Connect suspension
computer coupler. Measure resistance at
4P coupler of solenoid valves with coupler
Abnormal
disconnected
BrlR - G: 79 - 9.3Q
Br,'Y - G:
79 - 9.3 Q
Br'W - G: 13.3 - 157 Q
Normal
• Faulty air pump relay.
• Poor contact at terminals.
Relay/fuse box coupler.
- Right fairing coupler.
- Air pump relay terminals.
• Open or short circuit In wire harness
• Open or short circuit in subharness.
• Faulty solenoid valve.
(cont'd)
------------------------------_._
..
__
..
12-7