Honda 1986 GoldWing GL1200A Manual page 38

Ignition System
Service Information - - - - - - - - - - - - - - - - - - - - -
• Ignition liming is electronically controlled by the CFI electronic control unit (ECU). which receives input signals from
these sensors Ns, PB, Oth, GR/GL. and TW Refer to the CFI System (Section 10j for sensor inspection.
• Be sure the battery
IS
fully charged before troubleshooting the ignition system,
• Measuring outputs at coupler pms: Insert the tester probes from behind the coupler pins to avoid bending or prying
them open, Be careful not to short out pins.
• Disconnecting a coupler or connector: Turn the ignition switch OFF. Positive (+) and negative (-) sides are so
mar1<ed, Do not remove waterproof grommets from the couplers.
Fuses/Relays
ECU Coupler Pin Numbers
IGNITION·REGULATOR
FUSE /10A)
Parts Location
11
SENSOR
Eeu
(COMPUTER)
' , - - - ;
7-2
,
,
-- ---•.1."_
_ . .
_~
_ _ .__ -------r-
j.,.-.
"
\
!
j
\
\
\
\
\
\