Honda 1986 GoldWing GL1200A Manual page 132

Auto Leveling Rear Suspension
Air Distributor - - - - - - - - - - - - - - - - - - - - - -
Removal
Remove the plugs from the three socket bolts.
Remove the bolts.
Disconnect the coupler to remove the display unit.
-.
-
Remove the top compartment.
Remove the pressure sensor bracket mount bolts.
Disconnect the computer. pressure sensor, and solenoid
valve couplers.
Disconnect the outlet air hose and fitting from the fairing
panel.
Remove the nght falnng inner cover.
Disconnect the front and rear suspension air hoses
trom
the air distributor.
NOTE' Use a wrench to keep the hose joint from turning
while loosening the hose joint nut. Remove hoses slowly
to allow pressure to bleed from air lines.
Free the air rehef hose
tram
the wire band.
Lift the air distributor out of the fairing. Disconnect the air
drier hose.
NOTE The hose joint contains a steel ball. spring seat
and spring. Be careful not to drop these. Inspect the
O-nng and steel ball seat
tor
damage or deterioration.
Remove the vent hose from the front of the air distnbutor
Remove the air distributor.
12-18
STEEL BALL
SEAT