Honda 1986 GoldWing GL1200A Manual page 143

Cruise Control
Troubleshooting - - - - - - - - - - - - - - - - - - - - -
Cruise control does not function at all.
NOTES:
Cruise control will be cancelled when:
• Either brake
IS
applied.
• Clutch lever is operated.
• TransmissIon is shifted
• Two or more switches are operated
simultaneously.
• Throttle is returned.
• Ignition switch. engine stop switch or
cruise switch is operated.
Cruise control will not function under the
following conditions.
• At speeds other than 30-80 mph.
• Transmission set In other than 4th or 00.
CRUISE INDICATOR: Turn ignition switch
Abnormal
ON and check that the cruise indicator light •
Go to CRUISE INDICATOR LIGHT DOES
comes on for a few seconds. then goes
NOT COME ON WHEN IGNITION SWITCH
off.
IS TURNED ON troubleshooting.
Normal
Isee page 13-9).
Check cruise indicator light for function
Not Lit
Check auto leveling suspension display for
with ignition switch ON.
operation.
Lit
_t
Abnormal
BRAKELIGHT/WIRING: Is brakellght
Normal
• Go to LCD DOES
NOT DISPLAY
turned ON with ignition switch ON?
troubleshooting. (see
OFF
lON
page 12-9).
Short wires between Bu/O
(+)
and G (-)
A
•
Rear brakelight not
terminals of instrument 13P white coupler
adjusted property
with ignition switch ON. Indicator should go
•
Incorrect connection
ON.
of front brakellght
switch and cruise
Yes
No
cancel switch.
B
C
13·4
Go to page 13-6. Go to page 13·6.