Honda 1986 GoldWing GL1200A Manual page 161

Cruise Control
Throttle Cable Adjustment - - - - - - - _
Position the actuator on the bracket and slightly ltghten
the mount nuts. (Allow tree movement of the actuator for
further adjustment.)
'-'-'f,
Loosen the actuator cable lock nut and tum the cable ad-
Juster until the front end at the control lever is in the
groove In the case as shown.
Tighten the adjuster lock nut.
Tighten the actuator mount nuts.
Loosen the upper throttle cable adjusters to allow play In
the upper throttle cable
Tum the lower throttle cable adjuster to align the index
mark on the cable drum with the arrow mark on the case.
Tighten the throttle cable adjuster lock nut.
Tighten the upper cable lock nut.
NOTE: Adjust throttle grip free play and check operation
of the throttle grip and cancel switch. Recheck alignment
ot the Index and arrow marks.
Install the junction box cover.
13-22
LOCK NUT
INDEX MARK
CONTROL ARM
LOCK NUT LOWER CABLE
ADJUSTER
~
UPPER CABLE LOCK NUT