Honda 1986 GoldWing GL1200A Manual page 137

Pressure Relief Valve - - - - - - - - - - - - - - - - - - -
Removal/Inspection/Installation
Remove the air pump.
Remove the air pump cover.
Connect the air pump wire to the wiring harness.
Check that no air leaks past the the relief port during
operation of the pump.
RELIEF PORT
It air does leak, disassemble the relief valve and check
the pistons, rubber seat and O-ring for wear or damage.
Install new parts as necessary.
Install the relief valve components.
Tighten the hose fitting.
Torque: 55 N.m (41 ft-lb)
RUBBER SEAT'
PISTON
PISTON
O-RING
L ' O S E FITTING
Suspension Computer - - - - - - - - - - - - - - - - - - -
Removal
Remove the top compartment and right fairing pocket.
Disconnect the 20P black coupler
Remove the two bolts and case lid.
Remove the computer from the case.
NOTE. To remove the computer case. the fairing must be
removed.
Installation
Install in the reverse order of removal.
NOTE: Keep moisture. oil, and grease away from all com-
puter parts.
COMPUTER
} , \ , CUSHION
\,()v
\V
12-23