Honda 1986 GoldWing GL1200A Manual page 158

Resume Switch
Measure voltage between the
W/Y(+}
and
G(-)
terminals
of the cruise control coupler.
The sWitch is normal if battery voltage is present with the
resume switch flipped up, and the cruise and Ignition
switches ON.
To further test the resume switch, check for continuity
between the terminals of the handlebar switch coupler.
Remove the coupler holder from the fairing and discon-
nect the brown 6P right handlebar switch coupler. Check
for continuity between the terminals.
UPPER CABLE
~
LOWER CABLE
~
o
!!J"
C' " i
Ll
."
~ ~~
@t6
, /
\
CABLE DRUM WASHER
Remove the cable drum from the cable ends.
Remove the circlip and washer.
Remove the mount bolts and junction box from its
bracket.
Remove the cover from the junction box.
Remove the actuator cable and loosen the throttle cable
lock nuts.
Junction Box - - - - - - - - - - - - - - - - - - - - - - - -
Removal/Disassembly
Disconnect the lower throttle cable first, then the upper
throttle cable.
Remove the control arm and return spring from the junc-
tion box.
[conl'd)
13·19