Honda 1986 GoldWing GL1200A Manual page 28

Engine Removal/Installation
Removal
(cont'd) - - - - - - - - - - - - - - - - - - - - - - - - - -
Remove the clutch slave cylinder from the engine. The
pushrod should stay In the engine.
NOTE: Pull the clutch lever in and tie it to the handlebar
grip. This prevents overextension of the slave cylinder
piston.
Remove the two bolts from the top of the front engine
mount bracket.
Remove the two bolts from the bracket front.
Remove the fan shroud and the front bracket.
Remove the left engine mount bolt and the cap nuts, then
remove the subframe.
- - - - - - - - - - - - - - - -
-