Installation
Position the sensor with the arm through the boot.
Insert the brake reservoir bolt through the frame and
rotate the bracket into place.
Install the rear brake reservoir.
Route the sensor wire and connect the sensor coupler.
Connect the sensor arm to the connecting rod. Tighten
the
8
mm bolt.
Torque: 21 N.m (15 't-Ib)
Adjustment
Support the motorcycle on Its center stand.
Loosen the adjusting rod pinch bolts.
Tum the adjusting rod to align the end of the sensor arm
with the sensor case index mark.
Tighten the adjusting rod pinch bolts.
Torque: 12 N.m (9 ft-Ib)
Install parts in the reverse order of removal.
SENSOR ARM
/
INDEX MARK
12-25