Honda 1986 GoldWing GL1200A Manual page 7

General Information
Emission Control Systems
(cont'd)
Noise Emission Control System
TAMPERING WITH THE NOISE CONTROL SYSTEM IS PROHIBITED: Federal law prohibits the following acts or the
causing thereof: (1) The removal or rendering inoperative by any person, other than for purposes of maintenance.
repair or replacement, of any device or element of design incorporated into any new vehicle for the purpose of noise
control prior to its sale or delivery to the ultimate purchaser or while it is in use; or (2) the use of the vehicle after such
device or etement of design has been removed or rendered inoperative by any person.
AMONG THOSE ACTS PRESUMED TO CONSTITUTE TAMPERING ARE THE ACTS LISTED BELOW:
1. Removal of. or puncturing the muffler, baffles, header pipes or any other component which conducts exhaust
gases.
2. Removal of, or puncturing of any part of the intake system.
3. Lack of proper maintenance.
4. Replacing any moving parts of the vehicle, or parts of the exhaust or intake system, with parts other than those
specified by the manufacturer.
Emission Control Information Label
The Emission Control Information Label is located on the frame tube below the rear brake pedal and carries tune up
specifications for the motorcycle.
Vacuum Hose Routing Diagram Label
(California Only)
A Vacuum Hose Routing Diagram Laoel is attached to the
fuel tank behind the right side cover, Route the vacuum
hoses as shown on this label.
1-6