Honda 1986 GoldWing GL1200A Manual page 148

Cruise Indicator Light Does Not Come On When Ignition Switch Is Turned On.
NOTE: Check indicator bulbs if either cruise "set" or cruise "on" indicator does not come on.
• Poor contact at
coupler.
check relay
DISPLAY OPERATION: Check auto
Abnormal
leveling suspension display operation.
•
Go to LC D. DOES NOT DISPLAY
troubleshooting (see page 12-9).
Normal
WIRING: Turn ignition sWitch ON Measure
voltage between
W
terminal of instrument
o
Volts
20P black coupler and G terminal of
•
Poor contact at Red 2P coupler in
instrument
1
3P black coupler
fairing.
•
Open circuit in fairing sub-harness.
Battery Voltage
INDICATOR RELAY: Measure voltage
o
Volts
WIRING: Measure voltage between BI/Br
between BllBr and G terminals of the terminal of Indicator light check relay
Indicator light check relay coupler.
coupler and battery negative terminal.
Battery
o
Volts
Voltage
Battery
Voltage
•
Open circuit in wire
•
Open circuit in wire
harness (G wire).
harness (BI/Br wire).
WIRING: Short wires between BulO and
WIRING: Short wires between BulO and
G BulR and
G
terminals of indicator light
Abnormal
G; Bu/R and G terminals of instrument 13P
cneck relay coupler The crUise indicator
black coupler. Turn ignition switch ON, the
light should come ON
cruise indicator light should come ON.
Normal
Abnormal Normal
(,
RELAY COUPLER: Cneck indicator light
•
Burned out bulbs.
•
Poor contact at left
check relay coupler for poor contact.
•
Open Circuit in
fairing coupler.
Instrument indicator
•
Open circuit in wire
sub-harness. harness or fairing
Normal
sub-harness.
•
Faulty tndicator
Abnormal
(cont'd)
13-9
'---._~-------~----~------