Honda 1986 GoldWing GL1200A Manual page 52

Lig hts/Switc hes/l nstru ments
Troubleshooting
(cont'd) - - - - - - - - - - - - - - - - - - - -
Display Will Not Shift Between "km" and "mile".
METER: Short BulBI terminal of meter
Display Does
Not Shift
white 20P coupler to G/BI terminal of
->.
meter white 13P coupler. Display
shOuld shIft
Display
Shifts
ETC UNIT/WIRING: Short BulBI terminal of
Display Does
Not Shift
ETC
Unit
white 17P coupler to G/BI
termInal Display should shift.
Display
Shifts
Tripmeter Cannot Be Reset.
METER: Short R'G terminal of meter white
Meter Does
20P coupler to G/BI terminal of meter
Not Reset .....
white 13P coupler. Meter is normal if
it resets.
Meter
Resets
ETC UNIT/WIRING: Disconnect meter
No
white 20P coupler and ECU white 17P
Continuity
coupler Check for continuity between
RIG terminals of both couplers.
Normal
8-8
• Check for poor contact at meter
coupler. If coupler is OK. meter
IS
faUlty,
• Open or short circuit in wire
hamess.
• Poor contact at left fairtng coupler.
• Check for poor contact at ETC unit
coupler. If coupler is OK, trouble is in
ETC unit printed circuit board.
• Check for poor contact at meter
coupler. If coupler is OK. meter
IS
faulty.
• Open or Short circuit in wire
harness.
• Poor contact at left fairing coupler.
• Check for poor contact at ETC unit
coupler. If coupler is OK, trouble is in
ETC unit printed circuit board.