Honda 1986 GoldWing GL1200A Manual page 27

Disconnect the air valve heater coupler from the air
valve.
Disconnect the gear shift sensor wire coupler.
Disconnect the engine sub-harness (White 2P and red
6P) couplers.
Disconnect the Ns sensor wire (White 2P. yellow/white
wires) coupler.
Disconnect the GAlGL sensor wire (white 4P coupler.
Release the wires from the wire band.
Disconnect the oil pressure sensor (yellow waterproof
3P) coupler.
Disconnect the Tw sensor (blue waterproof 2P) coupler.
Release the wires from the wire bands.
Release the engine sub-harness, shift sensor wire. Ns
sensor wire. and fan motor wires from the wire bands and
wire clamps.
(cont'd)
4-3