Vacon 100 Industrial Applications Manual page 4

VACON · 4
How to use the parameters.
•
Digital and analogue input programming.
•
Application-specific functions.
•
Chapter 11, Fault tracing
The faults and their causes.
•
Resetting the faults.
•
Chapter 12, Appendix 1
Data on the different default values of the applications.
•
This manual includes a large quantity of parameter tables. These instructions tell you how to
read the tables.
A B
Index Parameter
A. The location of the parameter in the
menu, that is, the parameter number.
B. The name of the parameter.
C. The minimum value of the parameter.
D. The maximum value of the parameter.
E. The unit of the value of the parameter.
The unit shows if it is available.
NOTE! You can download the English and French product manuals with applicable safety, warning and caution
information from http://drives.danfoss.com/knowledge-center/technical-documentation/.
REMARQUE Vous pouvez télécharger les versions anglaise et française des manuels produit contenant l'en-
semble des informations de sécurité, avertissements et mises en garde applicables sur le site http://
drives.danfoss.com/knowledge-center/technical-documentation/.
C D E
Min Max Unit
F. The value that was set in the factory.
G. The ID number of the parameter.
H. A short description of the values of the
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
F G H
Default ID Description
parameter and/or its function.
PREFACE