Vacon 100 Industrial Applications Manual page 265

PARAMETER DESCRIPTIONS
Selection
Selection name
number
Test 0% (Not used)
0
TEST 100%
1
Output frequency
2
Frequency reference
3
4 Motor speed
Output current
5
Motor torque
6
Motor power
7
8 Motor voltage
9 DC-link voltage
10 PID Setpoint
11 PID Feedback
12 PID output
13 ExtPID output
Fieldbus Process Data In 1
14
Fieldbus Process Data In 2
15
Fieldbus Process Data In 3
16
Fieldbus Process Data In 4
17
Fieldbus Process Data In 5
18
Fieldbus Process Data In 6
19
Fieldbus Process Data In 7
20
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
Description
The analogue output is set to 0% or 20% so that it agrees
with parameter P3.5.4.1.3.
The analogue output is set to 100% of the signal (10V /
20mA).
The actual output frequency from 0 to Maximum frequency
reference.
The actual frequency reference from 0 to Maximum fre-
quency reference.
The actual motor speed from 0 to Motor nominal speed.
The output current of the drive from 0 to Motor nominal cur-
rent.
The actual motor torque from 0 to motor nominal torque
(100%).
The actual motor power from 0 to Motor nominal power
(100%).
The actual motor voltage from 0 to Motor nominal voltage.
The actual DC-link voltage 0...1000V.
The actual setpoint value of the PID Controller (0...100%).
The actual feedback value of the PID Controller (0...100%).
The output of the PID controller (0...100%).
The External PID controller output (0...100%).
Fieldbus Process Data In 1: 0...10000 (this agrees with 0...
100.00%).
Fieldbus Process Data In 2: 0...10000 (this agrees with 0...
100.00%).
Fieldbus Process Data In 3: 0...10000 (this agrees with 0...
100.00%).
Fieldbus Process Data In 4: 0...10000 (this agrees with 0...
100.00%).
Fieldbus Process Data In 5: 0...10000 (this agrees with 0...
100.00%).
Fieldbus Process Data In 6: 0...10000 (this agrees with 0...
100.00%).
Fieldbus Process Data In 7: 0...10000 (this agrees with 0...
100.00%).
VACON · 265
10