Vacon 100 Industrial Applications Manual page 194

VACON · 194
Table 122: Fieldbus Status Word
Bit
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
Bit 13
Bit 14
Bit 15
V2.12.12 FB SPEED ACTUAL (ID 865)
This monitoring value shows the actual speed of the drive as a percentage of minimum
frequency and maximum frequency.
The value 0% indicates the minimum frequency and the value 100% indicates the maximum
frequency. This monitoring value is continuously updated depending on the momentary min
and max frequencies and the output frequency.
V2.12.13 FB DATA OUT 1 (ID 866)
This monitoring value shows the raw value of process data in a 32-bit signed format.
V2.12.14 FB DATA OUT 2 (ID 867)
This monitoring value shows the raw value of process data in a 32-bit signed format.
9
Value = 0 (FALSE)
Not ready to operate
Not running
Running in the Forward direction
No fault
No alarm
Requested speed not reached
Actual speed of the drive not zero
Motor not magnetized (flux not ready)
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
MONITORING VALUE DESCRIPTIONS
Descriptions
Value = 1 (TRUE)
Ready to operate
Running
Running in the Reverse direction
Fault is active
Alarm is active
Running at requested speed
Actual speed of the drive is zero
Motor magnetized (flux ready)
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved