Vacon 100 Industrial Applications Manual page 243

PARAMETER DESCRIPTIONS
PROGRAMMING IN THE TEXT DISPLAY
1 Make a selection of a parameter. To go into the Edit
mode, push the OK button.
2 In the Edit mode, the letter D blinks. If you have
more digital inputs available in your I/O, for
example, because of option boards in slots C, D or
E, make a selection of them.
3 To activate the terminal 3, push the arrow button
Right again. The letter D stops blinking.
4 To change the terminal to 6, push the arrow button
Up 3 times. Accept the change with the OK button.
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
VACON · 243
10