Vacon 100 Industrial Applications Manual page 227

PARAMETER DESCRIPTIONS
Selection
Selection name
number
0 Binary coded
1 Number (of inputs used)
P3.3.3.2 PRESET FREQUENCY 0 (ID 180)
Use this parameter to set the preset frequency reference when the preset frequencies
function is used.
Select the preset frequencies with the digital input signals.
P3.3.3.3 PRESET FREQUENCY 1 (ID 105)
Use this parameter to set the preset frequency reference when the preset frequencies
function is used.
Select the preset frequencies with the digital input signals.
P3.3.3.4 PRESET FREQUENCY 2 (ID 106)
Use this parameter to set the preset frequency reference when the preset frequencies
function is used.
Select the preset frequencies with the digital input signals.
P3.3.3.5 PRESET FREQUENCY 3 (ID 126)
Use this parameter to set the preset frequency reference when the preset frequencies
function is used.
Select the preset frequencies with the digital input signals.
P3.3.3.6 PRESET FREQUENCY 4 (ID 127)
Use this parameter to set the preset frequency reference when the preset frequencies
function is used.
Select the preset frequencies with the digital input signals.
P3.3.3.7 PRESET FREQUENCY 5 (ID 128)
Use this parameter to set the preset frequency reference when the preset frequencies
function is used.
Select the preset frequencies with the digital input signals.
P3.3.3.8 PRESET FREQUENCY 6 (ID 129)
Use this parameter to set the preset frequency reference when the preset frequencies
function is used.
Select the preset frequencies with the digital input signals.
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
Description
The mix of the inputs is binary coded. The different sets of
active digital inputs determine the preset frequency. See
more data in Table 123 The selection of preset frequencies
when P3.3.3.1 = Binary coded.
The number of active inputs tells which preset frequency is
used: 1, 2 or 3.
VACON · 227
10