Vacon 100 Industrial Applications Manual page 164

VACON · 164
Table 110: The total counter parameters in the diagnostics menu
Index Parameter
V4.4.1 Energy Counter
Operating Time
V4.4.3
(graphical keypad)
Operating Time (text
V4.4.4
keypad)
Operating Time (text
V4.4.5
keypad)
Operating Time (text
V4.4.6
keypad)
Run Time (graphical
V4.4.7
keypad)
Run Time (text key-
V4.4.8
pad)
Run Time (text key-
V4.4.9
pad)
Run Time (text key-
V4.4.10
pad)
Power On Time
V4.4.11
(graphical keypad)
Power On Time (text
V4.4.12
keypad)
Power On Time (text
V4.4.13
keypad)
6
Min Max Unit
Varies
a d
hh:min
hh:min:
ss
a d
hh:min
hh:min:
ss
a d
hh:min
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
Default ID
The quantity of energy
taken from the supply
network. You cannot
reset the counter. In
the text display: the
2291 highest energy unit
that the display shows
is MW. If the counted
energy becomes more
than 999.9 MW, no unit
shows on the display.
The operating time of
2298
the control unit.
The operating time of
a the control unit in total
years.
The operating time of
d the control unit in total
days.
The operating time of
the control unit in
hours, minutes and
seconds.
The motor run time.
2293
The motor run time in
a
total years.
The motor run time in
d
total days.
The motor run time in
hours, minutes and
seconds.
The quantity of time
that the power unit has
2294 been powered on. You
cannot reset the coun-
ter.
The power on time in
a
total years.
The power on time in
d
total days.
DIAGNOSTICS MENU
Description