Vacon 100 Industrial Applications Manual page 135

PARAMETERS MENU
Table 72: AI low protection settings
Index Parameter
Analogue Input Low
P3.9.8.1
Protection
Analogue Input Low
P3.9.8.2
Fault
Table 73: User Defined Fault 1
Index Parameter
P3.9.9.1 User Defined Fault 1
Response to User
P3.9.9.2
Defined Fault 1
Table 74: User Defined Fault 2
Index Parameter
P3.9.10.1 User Defined Fault 2
Response to User
P3.9.10.2
Defined Fault 2
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
Min Max Unit
0 2
0 5
Min Max Unit
N/A N/A
N/A N/A
Min Max Unit
N/A N/A
N/A N/A
Default ID Description
0 = No protection
1 = Protection enabled
767
in Run state
2 = Protection enabled
in Run and Stop state
0 = No action
1 = Alarm
2 = Alarm + preset
fault frequency
(P3.9.1.13)
0 700
3 = Alarm + previous
frequency reference
4 = Fault (Stop accord-
ing to stop mode)
5 = Fault (Stop by
coasting)
Default ID Description
OPEN = No operation
DigIN
15523
Slot0.1 CLOSED = Fault activa-
ted
Fault,Coa
15525
st
Default ID Description
DigIN OPEN = No operation
15524
CLOSED = Fault activa-
Slot0.1
ted
Fault,Coa
15526
st
VACON · 135
5