Performing Internal Logging - Omron ZW-C1*T User Manual

5-4 Performing internal logging

Up to 12,800 x 4tasks measured data can be logged in the Sensor Controller's internal memory.
Item
LoggingMode
SamplePeriod
 Explorer pane
 Edit pane
 Online setting window : [Internal Logging]
1
Set the logging conditions.
Select the [Preservation interval], [logging data
count], and the TASK to store the data for.
Item Setting item
Data logging Preservation
conditions intervals
Logging data
count
TASK1
TASK2
TASK3
TASK4
2
Click the [Logging start] to start internal
logging.
A confirmation message is displayed. Click
[Yes] to start internal logging.
Note
Starting internal logging can also be executed by No-protocol communications or parallel I/O.
ZW User's Manual
Output items Description
Internal Indicates the internal logging.
1 to 99999 Indicates the storage interval.
: [(ZW model name)] (double click)
: [Online] icon (
Range
1 to 99999
1 to 12800
OFF/ON
OFF/ON
OFF/ON
OFF/ON
)
Description
Set the data storage interval.
If "1" is set , all measured data is stored, and "2" is set, one
measurement value is stored every two measurement.
Set the number of data points to store for each TASK.
Set whether to store the measurement results for TASK 1.
Set whether to store the measurement results for TASK 2.
Set whether to store the measurement results for TASK 3.
Set whether to store the measurement results for TASK 4.

Performing internal logging

125