Setting Exposure Time Control Mode - Omron ZW-C1*T User Manual

Setting Exposure Time Control Mode

Setting Exposure Time Control Mode p.75
As an example, here is an explanation of the procedure for setting the exposure time control mode to "AUTO"
and the exposure time (maximum) to "500 s".
Operating procedure
Steps Key operation
1
2
3
4
5
6
230
Setting Sensing
Display Description
Press and hold the
mode.
Press the
key.
Press the
key.
Select the exposure time control mode.
AUTO: Automatic
MANUAL: Fixed
The current setting value is displayed on the sub-display.
Press
In this example, select "AUTO" and press the
Set the exposure time (maximum) or exposure time (fixed).
In this example, "UPPER" is displayed on the main display, and the
current setting value is displayed on the sub-display.
Press
blinks.
To edit numerical values, use the
In this example, select "500" and press the
Press the
key for two seconds to enter the FUN
/ keys to select "SENS" and press the
/ keys to select "EXPOSE" and press the
/ key to enter editing mode and the sub-display blinks.
key to enter the editing mode, and the sub-display
/ /
key for two seconds to enter the RUN mode.
key.
/ keys.
key.
ZW User's Manual