Processing unit data setting command <DS command>
Change the setting data of the processing unit.
<Command format>
D
S
↑
Space
↑
Unit number
<Response format>
Normal processing
O
K
CR
When a command was not successfully processed
E
R
CR
<Parameter explanation>
Parameter
Description
Unit number
Specifies the unit number (0 to 255) to be acquired.
Data number
Specifies the data number (0 to 255) to be acquired.
Setting value
This is the setting value of the specified data.
Important
For unit numbers and data numbers, refer to "10-3 Processing Item Data List" (p.308).
ZW User's Manual
↑
Space
↑
Data number
↑
Space
↑
Setting value (N letter)
CR
No-protocol Connection
183