Operation Mode Selection Guidelines
1
This section describes how to set an operation mode suitable for your specific purpose.
[Note 1]: Reference:
High-speed Logging Mode
Normally one CPU is used to perform measurement, image logging and image display. The FZ4-11
/H11
series performs processing using two CPUs, with one CPU used exclusively for measurement
and the other performing non-measurement processing. This ensures maximum measurement
performance at all times.
Parallel-operation High-speed Mode
Two CPUs are used to share and process measurement tasks internally. Processing is executed in
parallel to shorten the measurement time to maximal 50%.
Parallel processing is performed for each processing unit to shorten the total processing time.
32
Setting Operation Mode
About Multiple Image Input Function (p.559)
FZ4 User's Manual