Omron ZW-C1*T User Manual page 154

Note
Clamp values can also be set with key operations on the Sensor Controller.
Setting the Clamp Value p.274
Setting the Clamp Value for Binary Output
Set the clamp value to output when "Clamp" is selected as processing when measurement is not possible.
Item Setting item
Binary output Clamp output
1
Set the operating mode to the FUN mode.
3-3 Switching operation modes p.57
 Explorer pane
 Edit pane
 I/O Setting Screen
2
Select the output value at [Clamp output].
Note
Clamp values can also be set with key operations on the Sensor Controller.
Setting the Clamp Value p.274
152
Parallel I/O connection
Setting value
MIN (Default value)/MAX
: [Bank] | [(Bank Data Name)] (double click)
: [I/O Settings] icon (
: [Binary output]
Description
Select the binary output at clamp output.
MIN: -1048576
MAX: 1048575
)
ZW User's Manual