Table of Contents
Advertisement
3-7 Saving a project
Saving a project
Save the project being edited with the PC tool.
The project to be saved has the following information.
Configuration data
Project information
Entire sensor information
Tool setting information
A project cannot be saved in RUN mode. Switch to the RUN mode to save.
Note
3-3 Switching operation modes p.57
Important
• Save a project data when the setting of the Sensor Controller is changed. If the power is turned off without saving,
the changed setting is cleared.
Saving the Bank/System Settings p.108
1
Menu bar: Click [File] - [Save] to select.
Exporting a project
A project data (.smc) can be exported.
The exported data can be used by importing with the other personal computer's PC tool.
1
Menu bar: Click [File
Importing a project
The exported data from other personal computers can be imported as project data.
1
Menu bar: Click [File
66
Saving a project
Description
Information on the sensor registered in this project.
Entire sensor information.
Information on tool setting parameters for each sensor registered in this project.
] - [
]
Export
to select.
] - [
Import
]
to select.
ZW User's Manual
Advertisement
Table of Contents
Troubleshooting
