Omron ZW-C1*T User Manual page 260

Operating procedure
Steps Key operation
1
2
3
4
5
6
7
8
9
258
Setting Threshold Value
Display Description
Press and hold the
mode.
Press the
Press the
Press the
key.
Press the
key.
Select HIGH THRESHHOLD as the threshold value type.
Press the
key.
The current measured value is displayed on the main display and the
current set threshold value is displayed on the sub-display. (At this
time, the THRESHOLD-H indicator lights up.)
Press the
lower line in the main display.

Press the
The indicator for the current measured value on the main display
lights up, applying the value as a threshold value.
Press and hold the
mode.
key for two seconds to enter the FUN
/ key to select MEAS, then press the
/ key to select TASK1, then press the
/ key to select JUDGE, then press the
/ key to select TEACH, then press the
/ key to select H.JUDGE, then press the
key to display the current measured value on the
key to start a teaching.
key for two seconds to enter the RUN
key.
key.
ZW User's Manual