Initializing Settings - Omron ZW-C1*T User Manual

Setting the Number of Digits Displayed Past the Decimal Point
Set the number of digits displayed past the decimal point for when numerical values are displayed on the main
display and sub-display of the Sensor Controller.
Item Setting item
Sensor settings The number of decimal
places
1
Set the operating mode to the FUN mode.
3-3 Switching operation modes p.57
 Explorer pane
 Edit pane
2
Select the number of digits displayed past
the decimal point from [The number of
decimal places].
You can select from the above setting values.

Initializing Settings

Returns all banks/system settings to their default settings.
Important
• The settings of all banks/system settings are returned to the default settings regardless of the currently selected
bank number.
• Parameters for which the default values are decided by the Sensor Head measuring range (HYSTERESIS,
TRIGGER HYSTERESIS, HIGH THRESHOLD, LOW THRESHOLD) are all set to the factory default value "0".
 Explorer pane
 Edit pane
1
Click [Sensor setup] - [Initialize sensor].
Initialization is executed.
112
Setting the System
Setting value
0 to 5 Digit
(default value: 4 digits)
: [System] (double-click)
: [Sensor Settings] icon (
: [(ZW model name)] (double click)
: [Tool] icon ( )
Description
Set the number of digits displayed past the decimal point for
when numerical values are displayed on the Sensor
Controller.
)
ZW User's Manual