Changing Between Online And Offline - Omron ZW-C1*T User Manual

7-3 Changing between Online and Offline

Before you go offline, save all settings and parameter changes to the Sensor's internal memory. Saving your
project does not save the data in the Sensor.
You can use the following two methods to change between offline and online.
 Explorer pane
 Explorer pane
 Edit pane
1
To go offline, click [Disconnect]. To go
online, click [Connect].
2
When you click [Connect], the Connect to
Sensor Dialog Box is displayed.
3
When you click [Connect], you must
synchronize the data between the Sensor
and the project.
Follow the guidance and synchronize the data.
Note
Saving the Bank/System Settings p.108, p.255
Saving a project p.66
206
Changing between Online and Offline
: Right-click the Sensor model | [Offline/Disconnect] or [Online/Connect]
: [Device group] | [(Sensor model)] (Double-click)
: [Online] Icon | [Sensor connection] | [Connect] or [Disconnect]
ZW User's Manual