Saving The Bank/System Settings - Omron ZW-C1*T User Manual

Saving the Bank/System Settings

Save the bank/system settings to the Sensor Controller.
Important
• The settings of all banks are saved regardless of the currently selected bank number.
• After you have made or changed settings, be sure to save the setup data. All settings will be deleted if you turn the
power OFF without saving the data.
Here is an explanation of the procedure for saving the bank/system settings.
Operating procedure
Steps Key operation
1
2
3
4
5
ZW User's Manual
Display Description
Press and hold the
mode.
Press the
key.
Press the
key.
"OK/CAN" is displayed on the sub-display.
Press the
cancel.
Press the
key for two seconds to enter the FUN
/ keys to select "SYSTEM" and press the
/ keys to select "SAVE" and press the
key to save the settings or the
key for two seconds to enter the RUN mode.
Setting the Banks
key to
255