Omron ZW-C1*T User Manual page 197

System data setting <YS command>
Sets the system data.
<Command format>
Y S
↑
Space
↑
Data number
<Response format>
Normal processing
O K CR
When a command was not successfully processed
E R CR
<Parameter explanation>
Parameter Description
Data number Specifies the data number to be acquired.
Setting value This is the setting value of the specified data.
Note
For data numbers, refer to "10-4 System data list."
ZW User's Manual
CR
↑
Space
↑
Setting value
No-protocol Connection
195