D Setting The Key Speed; D About The Break-In Function - Icom IC-7300 Basic Manual

4
RECEIVING AND TRANSMITTING
Operating CW (Continued)
D Settingthekeyspeed
You can set the key speed of the internal electric
keyer.
1. Select the CW mode.
2. Display the Multi-function menu.
3. Touch [KEY SPEED].
4. Set the key speed to between 6 and 48 Words Per
Minute (WPM).
D AbouttheBreak-infunction
UsetheBreak-infunctionintheCWmodeto
automatically switch between transmit and receive
whenkeying.TheIC-7300iscapableofSemiBreak-in
and Full break-in modes.
TIP: The key type is set to "Paddle" by default. You can
select the keyer type on the CW-KEY SET screen.
Push
(p. 4-14)
SemiBreak-inoperation
IntheSemiBreak-inmode,thetransceivertransmits
when keying, and then automatically returns to receive
after a preset time after you stop keying.
1. Select the CW mode.
2. Push
L Pushing
"F-BKIN(FullBreak-in)"orOFF(noindication).
SemiBreak-in
Rotate
3.  T oadjusttheBreak-indelaytime,holddown
Push
VOX/BK-IN
• OpenstheBKINmenu.
4. Set to where the transceiver does not return to
receive while keying.
L When you are using a paddle, push
the Multi-function menu, and then adjust the KEY
SPEED while operating the paddle.
5. ToclosetheBKINmenu,push
4-12
todisplay"BKIN."
VOX/BK-IN
selects"BKIN(SemiBreak-in),"
VOX/BK-IN
for 1 second.
Rotate
to display
MULTI
.
EXIT