Setting Start Direction Of Count Measurement Surfaces - Omron ZW-C1*AT User Manual

Setting Start Direction of Count Measurement Surfaces

When a number of measurement surfaces exists, start direction can be selected from NEAR side or FAR side.
Example: NEAR
2 surface
3 surface
4 surface
Item Setting item
Operation mode Start direction of
count
measurement
surfaces
Important
It cannot set and display using Sysmac Studio.
Note
The setting of start direction of count measurement surfaces can also be set by the operating keys on the Sensor
Controller.
Setting Start Direction of Count Measurement Surfaces p.303
78
Setting Sensing
1 surface
Setting value
NEAR (default value)
FAR
Example: FAR
3 surface
2 surface
1 surface
Description
Measurement surfaces are counted from NEAR side.
Measurement surfaces are counted from FAR side.
4 surface
ZW User's Manual