4-2 Setting Measurement Items
What is a Measurement Item?
Obtain the waveform data based on the specified sensing condition, and calculate the height/thickness of up to
four surfaces included in the measuring range. Perform calculations using the output result of each task.
Count the measurement surface closest to the Sensor Head first.
Sensor head
Edge 1st
Edge 2nd
Edge 3rd
Edge 4th
Measuring the Height
The setting for common height
measurements as shown in the
following diagram is registered
for TASK1 in advance. In such
a case, this setting is not required.
Sensor head
ZW User's Manual
Set this item when measuring
the height of an object below
a transparent object as shown
in the following diagram.
Transparent
object
Edge 1st
Height
Sensor head
Edge 1st
Measurement
range
Edge 2nd
Setting Measurement Items
83