Timing Chart - Omron ZW-C1*AT User Manual

Timing Chart

The following shows the timing charts when communication is performed with external devices.
Basic operation
ON
Exposure
OFF
Judgment output
HIGH/PASS/LOW)
Analog output
Item
T0 Measuring cycle
T1 Exposure time
T2 Response time of output
T3 Response time of analog output
Explanation of operations
(1) During each measuring cycle, the LEDs are lit and exposure is started.
(2) After the end of exposure, measurement starts.
(3) After the end of measurement, the judgment result is output.
(4) After the judgment result output, the analog output is updated.
152
Parallel I/O connection
(1)
(2)
T0
T1 T2
(3) (4)
T3
Min.
0.5ms
1 s
T0x2

Max.
Depends on the set conditions
(0.5 to 10.0 ms)
Max. exposure time
(1 to 5000 s)
T0x2
0.1 ms
ZW User's Manual