Clearing The Bank Settings - Omron ZW-C1*AT User Manual

Clearing the Bank Settings

Clear (initialize) the setting of the currently selected bank.
Clearing the Bank Settings p.113
Important
Operations on the Sensor Controller do not initialize system settings and settings displayed in RUN mode.
Operating procedure
Steps Key operation
1
2
3
4
5
330
Setting the Banks
Display Description
Press and hold the
mode.
Press the
Press the
key.
"OK/CAN" is displayed on the sub-display.
Press the
cancel.
Press the
key for two seconds to enter the FUN
/ key to select BANK, then press the
/ keys to select "BK.CLR" and press the
key to clear the settings or the
key for two seconds to enter the RUN mode.
key.
key to
ZW User's Manual