Connecting By No-Protocol Communications; Initial Settings For No-Protocol Communications - Omron ZW-C1*AT User Manual

9-15 Connecting by No-protocol Communications

Initial Settings for No-protocol Communications

Initial Settings for No-protocol Communications p.228
Operating procedure
Steps Key operation
1 to 3 For moving to "COM", see steps 1 to 3 in p.350.
4
5
6
7
8
9 Repeat steps 6 to 8 to set other items.
10
352

Connecting by No-protocol Communications

Display Description
Press the
Select the setting item:
IPADDR: IP address
SUBNET: Subnet mask
PROTCL: Protocol
OUTIP: Output IP address
PORT.IN: Port number
PORT.OT: Output destination port number
In this example, press the
the
Selects the protocol.
The current setting value is displayed on the sub-display.
Press
Select "TCP.SV" and press the
Press the
Press the
Press and hold the
/ keys to select "RS232C" and press the
/ keys, select "PROTCL" and press
key.
/ key to enter editing mode and the sub-display blinks.
key.
key to return to the previous menu.
/ keys to select "OUTIP" and press the
key for two seconds to enter the RUN mode.
key.
key.
ZW User's Manual