Omron ZW-C1*AT User Manual page 71

Item Setting item
Judgment LOW threshold
HIGH threshold
 Explorer pane
 Edit pane
 Task settings window : [Judgment]
1
Enter the [LOW threshold] and [HIGH thresh-
old].
Important
• Hysteresis (hysteresis width) can also be set to threshold values. Set hysteresis when measured values are
dispersed around a threshold value, and judgments are unstable, to prevent chattering.
Setting Operation at Judgment Output p.146
• Threshold values can also be adjusted by directly entering values in the RUN mode.
This helps you to make fine adjustments without shutting down the system.
Changing Threshold Values p.301
Note
Threshold Value Settings can also be set by the operating keys on the Sensor Controller.
9-10 Setting Threshold Value p.331
ZW User's Manual
Setting value
- 999.999999 to 0 (default value) to
999.999999 [mm]
- 999.999999 to 0 (default value) to
999.999999 [mm]
: [Bank] | [(Bank Data Name)] (double click)
: [Task Settings] icon (
Description
Set the lower limit (LOW) threshold value.
Set the upper limit (HIGH) threshold value.
)
Setting Threshold Value
69