Connection Compatibility - Omron ZW-C1*AT User Manual

Connection Compatibility

Connected to Other connection
ZW-CE1@T
EtherCAT
EtherCAT ---
EtherNet/IP Not compatible
Ethernet Compatible
(no-protocol)
Ethernet Compatible
(programmable no-
protocol)
Important
• EtherCAT and EtherNet/IP connections cannot be used at the same time.
• Can be connected simultaneously via Ethernet with PC tools (Sysmac Studio, SmartMonitorZW) and another
device (PLC etc). Can be connected simultaneously via Ethernet with PC tools (Sysmac Studio, SmartMonitorZW)
and another device (PLC etc). The port number for the PC tool is fixed to 9600. When connecting different devices,
set the port number to other than 9600 (default value is 9601).
Product Model
ZW ZW-CE1@T
PC Tool Sysmac Studio Standard
Edition
• SYSMAC-SE200D
• SYSMAC-SE201L
• SYSMAC-SE2@@L
Sysmac Studio
Measurement Sensor
Edition
• SYSMAC-ME2@@L
Special EtherCAT Cable Refer to 10-1
Specifications and
Dimensions
General-purpose Ethernet ---
cable
Special I/O Cable For connecting to a PLC
or programmable terminal
• ZW-XPT2
For connecting to a PC
• ZW-XRS2
Industrial EtherNet/IP / • W4S1-03B
Ethernet Switching Hub
• W4S1-05B
• W4S1-05C
ZW User's Manual
EtherNet/IP
Not compatible
---
Compatible
Compatible
Application
This Displacement Sensor performs measurements.
This is the setup application. It is part of the Sysmac Studio Package and it
runs on Windows.
The Sysmac Studio comes in two different editions.
• Sysmac Studio Standard Edition
(no licenses included
The Sysmac Studio provides an integrated development environment for
(media only))
the NJ-series Controllers and other Machine Automation Controllers and
EtherCAT Slaves. It supports setup, programming, debugging, operation,
(1-license edition)
and maintenance.
The Sysmac Studio Standard Edition DVD includes Support Software for
(multilicense editions
EtherNet/IP, DeviceNet, serial communications, and PT screen design
(3, 10, 30, or 50
(CX-Designer). Refer to the Sysmac catalog (Cat. No. PXXX) for details.
licenses))
• Sysmac Studio Measurement Sensor Edition
This license provides the functions that are required to set up ZW Vision
Sensors from the Sysmac Studio. This model number is for the license
only. You must also purchase the DVD for the Sysmac Studio Standard
Edition Ver.1.05 or higher.
(1 or 3 licences)
The Special EtherCAT Cable connects the Sensor to another Sensor or to
another EtherCAT device.
Prepare commercially available Ethernet cable
satisfying the following requirements:
• Category 5e or more, 30 m or less
• RJ45 connector (8-pin modular jack)
• For direct connection: Select cross cable.
• For connection through an industrial switching hub: Select straight cable.
Connect the sensor with a PLC, programmable terminal, or personal
computer etc..
The Switching Hub connects multiple Sensors to one Touch Finder or one
computer running PC Tool.
(3 ports type)
(5 ports type)
Ethernet RS-232C
(no-protocol) (no-protocol)
Compatible Compatible
Compatible Compatible
--- Compatible
Compatible ---
I/O Cable
Compatible
Compatible
Compatible
Compatible
System Configuration
23