Performing Calculations - Omron ZW-C1*AT User Manual

Performing Calculations

Perform calculations using the results calculated by the tasks. The calculation formula is mX+nY+K.
Item Setting item
Calculation Parameter X
Parameter Y
Parameter K
Parameter m
Parameter n
 Explorer pane
 Edit pane
 Task Settings window : [Measurement mode] - [Calculation]
1
Select the task to be calculated from
[Parameter X] and [Parameter Y].
2
Select the offset value from [Parameter K].
3
Select the coefficient from [Parameter m]
and [Parameter n].
Note
Performing Calculations can also be set by the operating keys on the Sensor Controller.
Calculating p.307
86
Setting Measurement Items
Setting value
OFF (default value)/TASK1 to TASK4
OFF (default value)/TASK1 to TASK4
-999.999999 to 999.999999
(default value: 0)
-0.0 to 10.0 (Default value: 0)
-0.0 to 10.0 (Default value: 0)
: [Bank] | [(Bank Data Name)] (double click)
: [Task Settings] icon (
Description
The task to be calculated can be switched.
The task to be calculated can be switched.
Set the offset value.
Set the coefficient value.
Set the coefficient value.
)
ZW User's Manual