Omron ZW-C1*AT User Manual page 384

1
From the personal computer's Start menu,
select [All Programs] - [OMRON] - [ZW] -
[Warp Engine ZW].
The [Warp Engine ZW] screen is displayed.
If Warp Engine ZW fails to start up, a message
and then the following screen is displayed.
In this case, set the connection port.
2
If necessary, click [Update Controller
Information].
The model name and version of the currently
connected Sensor Controller are displayed.
3
Click [Read Update File], and select the file
to write to.
The model name and version of the Sensor
Controller held in the file are displayed.
4
Click [Start Update].
A message to confirm to start the update
appears.
Important
When you click [Start Update], if the "Different
format" message is displayed, this means that the
format information for the connected Sensor
Controller and the specified file do not match. If
this happen, never continue with the firmware
update. The Sensor Controller breaks down and
no longer starts up properly.
382
Firmware update ZW User's Manual