Settings For Judgment Output - Omron ZW-C1*AT User Manual

Settings for Judgment Output

The following describes the settings for outputting the judgment results from the judgment output of the 32-pole
extension connector.
Assigning judgment output
Set the task for which to output the judgment results.
The judgment results for the selected task are output from the following output terminals of the 32-pole
extension connector.
HIGH1/PASS1/LOW1
Item Setting item
Judgment Output object
1
Set the operating mode to the FUN mode.
3-3 Switching operation modes p.61
 Explorer pane
 Edit pane
 I/O Setting Screen
2
Select the task from [Output object].
Note
Judgment output can also be assigned with key operations on the Sensor Controller.
Assigning judgment output p.342
ZW User's Manual
Setting value
TASK1/TASK2/TASK3/TASK4
: [Bank] | [(Bank Data Name)] (double click)
: [I/O Settings] icon (
: [Judgment]
Description
Select the task for which to output the judgment result.
)
Parallel I/O connection
145