Omron ZW-C1*AT User Manual page 86

Item Setting item
Height settings Measurement
area
Measurement
surface
 Explorer pane
 Edit pane
 Task Settings window : [Measurement mode] - [Height]
1
Select the measurement area targeted for
measurement from [Measurement area].
2
Select the measurement surface targeted for
measurement from [Measurement surface].
Important
[Height] and [Edge1] are preset to TASK1 as the measurement item and measurement surface, respectively. To
measure the height in TASK2 to TASK4, set Edge1 first.
Note
Height measurement can also be set by the operating keys on the Sensor Controller.
Measuring the Height p.305
84
Setting Measurement Items
Setting value
Area 1 (default value)/Area 2
Edge1/Edge2/Edge3/Edge4/
peak (default value)
: [Bank] | [(Bank Data Name)] (double click)
: [Task Settings] icon (
Description
The area targeted for measurement can be switched.
The measurement surface targeted for measurement can
be switched.
The peak is the surface of all measurement surfaces having
the highest received light amount.
)
ZW User's Manual