Setting Originals In The Document Feeder (Adf) - Ricoh 450 Operating Instructions Manual

Setting Originals
Setting Originals In The Document Feeder
(ADF)
You can set several pages of originals in the document feeder (ADF) at a time.
Only originals that consist of separate sheets of paper can be set in the document
feeder (ADF); for convenience, such originals will be called "sheet originals." It
2
is possible to copy not only one side but both sides of originals that are set in the
document feeder (ADF).
Non-recommended originals for the document feeder
Setting the following originals in the document feeder might cause paper mis-
feeds or damage to the originals. Set these originals on the exposure glass.
• Originals other than those specified in the copy reference
• Stapled or clipped originals
• Perforated or torn originals
• Curled, folded, or creased originals
• Pasted originals
• Originals with any kind of coating, such as thermal fax paper, art paper,
aluminum foil, carbon paper, or conductive paper
• Originals with indexes, tags, or other projecting parts
• Sticky originals such as translucent paper
• Thin original that has low stiffness
• Originals of inappropriate weight in the copy reference
• Bound originals such as books
• Transparent originals such as OHP transparencies or translucent paper
Setting Originals In The Document Feeder
• Do not stack originals above the limit mark
• When copying thin originals (41–52g/m
set to Thin Paper mode, or set your originals on the exposure glass to avoid
damage due to a multi-sheet feed (if several sheets are fed together at the
same time).
See"Thin Paper mode"in the copy reference.
• The original might become dirty if it is written with a pencil or similar
tools.
• For 1–sided originals, you can select the ADF tray or the ADF external tray
as an output tray
See"22.ADF Orig.Ejection"in the System Settings.
• Scanning speed might be a little reduced if the ADF tray is selected as an
output tray. (for 1–sided originals)
10
2
11–14lb), select [DF Setting] and