Replacing A Host Bus Adapter - HPE XP7 User Manual

7. Enter the WWN of the new host bus adapter in the WWN combo box. For details on how to
get the HBA WWN, see the XP7 Provisioning for Open Systems User Guide. You can select
the WWN of the newly connected host bus adapter in the WWN combo box.
8. Enter a new PFC name in the PFC Name box and then select OK. You can use up to 64
characters for a PFC name.
9. In the Performance Control main window, click Apply to apply the settings to the storage
system.
Related topics
"WWN tab of the Performance Control main window" (page 230)
"Monitoring all port-HBA traffic: many-to-many connections" (page 122)

Replacing a host bus adapter

If you replace an existing host bus adapter, you need to use Performance Control to delete the
host bus adapter being removed and then add the host bus adapter being installed.
When you add a new host bus adapter rather than replacing one, the WWN of the new host bus
adapter is automatically displayed below Non-Monitor for the connected port in the list.
Prerequisites
Required role: Storage Administrator (System Resource Management)
You must enable the Remote Web Console secondary window. For details, see the XP7
Remote Web Console User Guide.
130 Performance Control operations