Shortrange - HPE XP7 User Manual

Operand
URLDEV
[ [ L D K C - C U - i d ] : [ L D K C - C U - i d ] ] [ ... ]
PhyMPPK
Examples
The following example exports statistics about host bus adapters:
group PortWWN
The following example exports statistics about three ports (CL1-A, CL1-B, and CL1-C):
group Port CL1-A:CL1-C
The following example exports statistics about six ports (CL1-A to CL1-C, and CL2-A to CL2-C)
group Port CL1-A:CL1-C CL2-A:CL2-C
The following example exports statistics about the parity group 1-3:
group PG 1-3:1-3
The following example exports statistics about the parity group 1-3 and other parity groups whose
ID is larger than 1-3 (for example, 1-4 and 1-5):
group PG 1-3:
The following example exports statistics about the external volume groups E1-1 to E1-5:
group PG E1-1:E1-5
The following example exports statistics about the parity group 1-3 and other parity groups whose
ID is smaller than 1-3 (for example, 1-1 and 1-2):
group LDEV:1-3
The following example exports statistics about LU paths for the host group (host storage domain)
ID 01 for the port CL1-A:
group LU CL1-A.01:CL1-A.01

shortrange

Description
Use this subcommand to specify a term of monitoring data to be exported into files. Use this
subcommand when you want to narrow the export-target term within the stored data.
The shortrange subcommand is valid for monitoring data in short range. Short-range monitoring
data appears in the Monitor Performance window when Short-Range is selected as the storing
period.
74 Exporting Performance Monitor data
Description
Use this operand when you want to export statistics about remote copy operations which of
Cnt Ac-J and Cnt Ac-J MF. By using this operand, you can export monitoring data about remote
copy operations performed by Continuous Access Journal and Continuous Access Journal
MF at volumes controlled by each CU. When statistics are exported to a ZIP file, multiple ZIP
files whose names are beginning with URLDEV_ will be output. For details on the statistics
exported by this operand, see
When you specify variable LDKC-CU-id, you can narrow the range of LDKC:CUs that control
the volumes whose monitoring data are to be exported. LDKC-CU-id is an ID of an LDKC:CU.
The colon (:) indicates a range. For example, 000:105 indicates LDKC:CUs from 00:00 to
01:05.
Ensure that the LDKC-CU-id value on the left of the colon is smaller than the LDKC-CU-id
value on the right of the colon. For example, you can specify URLDEV 000:105, but you
cannot specify URLDEV 105:000.
If LDKC-CU-id is not specified, the monitoring data of all volumes will be exported.
Use this operand when you want to export statistics about MP usage rate of each resource
allocated to MP blades in short range. When statistics are exported to a ZIP file, the filename
is PHY_MPPK.ZIP. For details on the statistics exported by this operand, see
(page 93).
Table 21 (page 98).
Table 14