Wwn Tab Of The Performance Control Main Window - HPE XP7 User Manual

Item
Delete ports if CHA
is removed
Apply
Reset
Initialize
Close
Related topics
"Analyzing traffic statistics: one-to-one connections" (page 116)
"Setting priority for ports: one-to-one connections" (page 115)
"Setting upper-limit values for non-prioritized ports: one-to-one connections" (page 117)
"Setting a threshold: one-to-one connections" (page 118)

WWN tab of the Performance Control main window

Use this tab to set the limit on the performance of non-prioritized WWNs and set the threshold
on the performance of prioritized WWNs.
230 Performance Control GUI reference
Description
Even if you use the different type of rate (IOPS or MB/s) for the threshold as that used for the
upper limit values, the threshold control can work for all ports.
If you check this check box, Performance Control deletes, from SVP, the setting information
of Performance Control on ports in channel adapters that have been removed.
When a channel adapter is removed, the port and its settings are removed from the
Performance Control main window automatically, but they remain in SVP. This may cause the
old setting for Performance Control to be applied to a different channel adapter than the one
newly-installed on the same location.
The Delete ports if CHA is removed check box is available only when the following
Performance Control settings on ports in a removed channel adapter remains on SVP:
The setting of prioritized ports or non-prioritized ports.
The setting of prioritized WWNs or non-prioritized WWNs.
Applies the settings in this window to the storage system.
Restores the last applied settings in the window. When you click this button, all changes
displayed with the blue text in the window are canceled.
Changes the settings in this window as explained below, and then applies the resulting settings
to the storage system:
All ports become prioritized ports.
The threshold value for all ports becomes 0 (zero).
The window will display a hyphen (-) instead of 0 (zero).
If the All Thresholds check box is checked, the check mark disappears.
Closes the Performance Control main window.