Renaming A Pfc Group - HPE XP7 User Manual

To assign an upper limit to the I/O rate, enter the upper limit value and then select IOPS
from the list. Next, select OK. To assign an upper limit to the transfer rate, enter the
upper limit value and then select MB/s from the list. Next, select OK.
7. In the Performance Control main window, click Apply to apply the settings to the storage
system.
To confirm an upper limit value specified for each PFC group, select the Storage System
folder in the lower-left tree on the WWN tab. The PFC groups are displayed in the list and
you can confirm each upper limit value.
Related topics
"WWN tab of the Performance Control main window" (page 230)

Renaming a PFC group

Prerequisites
Required role: Storage Administrator (System Resource Management)
You must enable the Remote Web Console secondary window. For details, see the XP7
Remote Web Console User Guide.
Procedure
1. Open the Performance Control window.
In Command View Advanced Edition:
1. On the Resources tab, expand the Storage Systems tree, right-click the target storage
system, and then select Other Functions.
2. In the displayed window, select Actions > Port/Host Group > Authentication.
3. In the next displayed window, select Go > Performance Manager > Performance
Control.
In Remote Web Console:
1. Click Reports > Performance Monitor > Performance Control to open the
Performance Control window.
2. Click
3. In the Performance Control window, click Performance Control. The Performance Control
main window appears.
4. Select the WWN tab.
5. In the lower-left tree, select and right-click a PFC group (
6. Select Rename PFC Group from the pop-up menu. The Rename PFC Group dialog box
opens.
136 Performance Control operations
to change to Modify mode.
).