HPE XP7 User Manual page 102

Export Tool messages
Missing command file
Missing group name
Missing host name
Missing output directory
Missing password
Missing svpip
Missing time range
Missing user ID
Out of range: range
Permission Denied.
RMI server error
(part-code,
error-number)
Same log path: path
Unable to display help
message
102 Exporting Performance Monitor data
Description
1. An incorrect operand is used for the
svpip subcommand.
2. An incorrect operand is used for the
login subcommand.
3. The specified user ID is used by another
user, and the user is logging in.
4. Another user is using the Performance
Control window.
5. Another user is running Export Tool.
6. The combination of DKCMAIN/SVP and
Export Tool is invalid.
If the error is not caused by the conditions
listed above, see "Troubleshooting Export
Tool" (page 100).
The command file is not specified.
No operand is specified in the group
subcommand.
No host name is specified.
No directory is specified for saving files.
Export Tool cannot find the user ID, which
is used to log on to SVP.
The svpip subcommand is not used.
The time range is not specified.
Export Tool cannot find the user ID, which
is used to log on to SVP.
The value is outside the range.
The user ID does not have the required
permission.
An error occurs at the RMI server.
Same path is specified for el.logpath and
el.logfile parameters, or md.logpath and
md.logfile parameters.
Export Tool cannot display the online help
due to a system error.
Recommended action
For 3, determine the user logging in with
same user ID and ask the user to log off.
For 4 and 5, take one of the following
actions:
Ask the other user to close the
Performance Control window.
Ask the other user to log off.
Wait for the other user to quit Export Tool.
For 6, use the correct combination of
versions for DKCMAIN/SVP and Export Tool.
Specify the name of the command file
correctly.
Specify operands for the subcommand.
Specify a host name.
Specify the directory for saving files.
Specify the password.
Use the svpip command.
Specify the time range.
Specify the user ID.
If the shortrange subcommand or the
longrange subcommand is used, specify
a value within the range from the monitoring
start time to the monitoring end time. For
specification required when you narrow down
the file save period with a longrange
subcommand, see "longrange" (page
If the set subcommand is used with the
switch operand, specify a value within the
range of 1 to 15.
Assign the applicable storage administrator's
role (performance management) to the user
ID.
See the XP7 Remote Web Console
Messages.
Check the path you have specified.
Run Export Tool again. If the problem occurs
again, contact HPE technical support. .
76).